Fingerprint Scanner Not Working On Samsung Galaxy S10, S10 Plus, S10e, Galaxy Fold

Your Samsung Galaxy S10 has a fantastic feature of the inbuilt fingerprint scanner. But this fantastic feature is quite tricky to find the issues when it is stopped. If you have the problem with Fingerprint Scanner, Firstly remove the Plastic layer which is provided on Scanner.

Even after removing the plastic you have the problem then don’t get panic we are here with the solutions for you:

Walkthrough Guide for fixing Your Fingerprint Scanner not WOrking on Samsung Galaxy S10/ Galaxy S10 Plus/ Galaxy S10e

Fingerprint Scanner Not Working On Samsung Galaxy

Fingerprint Scanner Not Working On Samsung Galaxy

Answer 1: Press Little Harder

This feature is quite booming, but sometimes it stops working. So to solve the issues of finger scanner press the finger little harder and now check if your device scans the finger or not.

back to menu ↑

Solution 2: Remove Screen Guard

Sometimes the finger is not able to be scanned because of using the third party cheap quality screen guards. For the safety of your device, we recommend that not to use such cheap quality protective covers for such delicate and sensitive screen of Samsung Galaxy S10. Then to solve such issue kindly remove your screen guard and try it again to scan the finger.

back to menu ↑

Solution 3: Update your Galaxy Mobile

Sometimes the problems are faced due to the non-updated phone. So we recommend you that when the update has been provided on your device kindly update your device. Those updates are provided to increase the quality and strengthen your expensive and valuable equipment. You will be notified with updates, and you can also check manually for new updates by following the steps given below:

1. Go to settings and open it.
2. In settings scroll down and click on the option About the Device/ About Phone. Just update your device for better results.

back to menu ↑

Solution 4: Re-add Fingerprint

Sometimes due non-working of device properly the problem of finger scanning is faced. So to solve this problem re-add your finger. If you are Re-adding your finger make sure that you do it properly with accuracy. Follow the steps given below:

Remove the Fingerprint On Samsung Galaxy S10

Follow the steps given below to remove the Fingerprint:

Step 1: Go to Settings and open it.
Step 2: In Settings click on Biometrics and Security.
Step 3: In that select the option of Fingerprint.
Step 4: Now you need to enter the Password /Pattern/PIN whichever you have added as security.
Step 5: After entering it Select the fingerprint and click the option Remove Fingerprint.

This is how you can remove the Fingerprint.

Add Fingerprint On your Samsung Galaxy S10

Follow the steps given below to add the fingerprint:

Step 1: Go to Settings and open it.
Step 2: In Settings open Biometrics and Security.
Step 3: In that select Fingerprint.
Step 4: After this, You need to set up Password/PIN/Pattern for security. If you already have set, then you can skip this step.
Step 5: Now follow the instructions and add fingerprint as per instructions.
Step 6: Now click on Done, As it is completed.
Step 7: You can rename the Fingerprint if you want.
So in this way you can remove or add fingerprint as per your need.

back to menu ↑

Solution 5: Turn on Screen Sensitivity:

If you have tried all the answers and you are still facing the problem, then you should try to increase the screen sensitivity. For doing so follow the steps given below:

Step 1: Go to Settings and open it.
Step 2: In Settings, open Display option.
Step 3: Scroll down and click on Touch Sensitivity.
Step 4: Switch On Touch Sensitivity.

back to menu ↑

Solution 6: Perform Factory Reset

By performing the factory reset all your defect and bugs will be removed, and by this, you will also come to know that whether the issue is with hardware or software and you can quickly solve the problem. Remember that before factory resetting the device take a Backup. To Factory reset device follow the steps given below:

Step 1: Go to Settings and Open it.
Step 2: Click on General Management.
Step 3: Click on Reset.
Step 4: Select Factory Data Reset.
Step 5: Read the information accurately and Click on Reset.
Step 6: And at last Confirm by pressing on Delete All.

back to menu ↑

Solution 7: Contact Samsung Support

After trying all the answers given above the fingerprint should start working, but if it is not started then contact the Samsung Support as early as possible. Bookmark or Share these tips with your friend because many times we need to change it or Periodically change or reset on Galaxy S10, Galaxy S10 Plus, Galaxy S10e or Galaxy Fold.

Was this post helpful? Submit Honest Feedback

We will be happy to hear your thoughts

      Leave a reply